Biomaterials are materials (synthetic and natural; solid and sometimes liquid) that are used in medical devices or in contact with biological systems. Biomaterials as a field has seen steady growth over its approximately half century of existence and uses ideas from medicine, biology, chemistry, materials science and engineering. There is also a powerful human side to biomaterials that considers ethics, law and the health care delivery system. This brief introduction overviews some key characteristics of the field of biomaterials and outlines issues and major subdivisons
Although biomaterials are primarily used for medical applications, they are also used to grow cells in culture, to assay for blood proteins in the clinical laboratory, in processing biomolecules in biotechnology, for fertility regulation implants in cattle, in diagnostic gene arrays, in the aquaculture of oysters and for investigational cell-silicon "biochips." The commonality of these applications is the interaction between biological systems and synthetic or modified natural materials.
Biomaterials are rarely used on their own but are more commonly integrated into devices or implants. Thus, the subject cannot be explored without also considering biomedical devices and the biological response to them.
Some common medical devices comprised of biomaterials are illustrated here:
A biomaterial is a nonviable material used in a medical device, intended to interact with biological systems. (Williams, 1987)
If the word "medical" is removed, this definition becomes more general and still quite useful.
If the word “nonviable” is removed, the definition becomes even more general and can address new tissue engineering and hydrid artificial organ applications where living cells are used.
A complementary definition needed to understand an important aspect of biomaterials is that of "biocompatibility."
Biocompatibility is the ability of a material to perform with an appropriate host response in a specific application. (Williams, 1987)
“Appropriate host responses” include lack of blood clotting, resistance to bacterial colonization and normal healing. Examples of specific applications include a hemodialysis (artificial kidney) membrane, a urinary catheter or a hip joint prosthesis. It is interesting that the hemodialysis membrane might be in contact with the patient’s blood for 3 hours, the catheter may be inserted for a week and the hip joint may be in place for the life of the patient.
The definitions introduce us to considerations that set biomaterials apart from most materials considered in materials science.
CHARACTERISTICS OF BIOMATERIALS AS A FIELD
We’ve defined some terms and reviewed a few specific examples. What are some characteristics of the field of biomaterials?
Biomaterials science brings together researchers from diverse academic backgrounds. They must communicate clearly. Some disciplines that intersect in the development, study and application of biomaterials include: bioengineer, chemist, chemical engineer, electrical engineer, mechanical engineer, materials scientist, biologist, microbiologist, physician, veterinarian, ethicist, nurse, lawyer, regulatory specialist and venture capitalist. This is only a partial list.
Biomaterials researchers and clinicians using biomaterials will have an appreciation of materials science and chemistry. Many different synthetic and modified natural materials are used in biomaterials and some understanding of the differing properties of these materials is important. A heart valve may be fabricated from polymers, metals, and carbons. A hip joint might be fabricated from metals and polymers (and sometimes ceramics) and will be interfaced to the body via a polymeric bone cement. In these examples, a single device uses many different materials, each with special properties and biological interactions.
Biomaterials by themselves do not make a useful clinical therapy. The materials have to be fabricated into devices. This is typically an engineer’s role, but the engineer might work closely with synthetic chemists to optimize materials properties and physicians to ensure that the device is useful in clinical applications.
Lysaght and O’Laughlin (2000) have estimated that the magnitude and economic scope of the contemporary organ replacement enterprise are much larger than is generally recognized. In the year 2000, the lives of over 20 million patients will be sustained, supported or significantly improved by functional organ replacement. The impacted population grows at over 10% per year. Worldwide, first-year and follow-up costs of organ replacement and prostheses exceeds $300 billion US dollars per year and represents between 7% and 8% of total worldwide healthcare spending. In the
Success and Failure are seen with Biomaterials and Medical Devices
Most biomaterials and medical devices perform satisfactorily, improving the quality of life for the recipient or saving lives. Still, manmade constructs are never perfect. Manufactured devices have a failure rate. Also, all humans differ in genetics, gender, body chemistries, living environment and physical activity. Furthermore, physicians also differ in their “talent” for implanting devices. The other side to the medical device success story is that there are problems, compromises and complications that occur with medical devices. Central issues for the biomaterials scientist, manufacturer, patient, physician and attorney are: (1) what represents good design; (2) who should be responsible when devices perform “with an inappropriate host response;” and (3) what are the cost/risk or cost/benefit ratios for the implant or therapy?
An example involving left ventricular assist devices (LVADs, sometimes incorrectly called artificial hearts) helps to clarify these issues. There are many complications with LVADs including clotting, strokes, blood damage and bacterial infection. A clinical trial called Randomized Evaluation of Mechanical Assistance for the Treatment of Congestive Heart Failure (REMATCH) led to following important statistics (Rose, et al, 2001). Patients with an implanted Heartmate® LVAD (Thoratec Laboratories) had a 52% chance of surviving for one year, compared with a 25% survival rate for patients who took medication (the common therapy for congestive heart failure). Survival for two years in patients with the Heartmate® was 23% versus 8% in the medication group. Also, the LVAD enhanced the quality of life for the patients – they felt better, were less depressed, and were mobile. Note that patients participating in the REMATCH trial were not eligible for a heart transplant. In the case of the LVAD, long-term clinical complications associated with imperfect performance of biomaterials does not preclude clinical success overall. The LVAD is better than the next best therapy.
These five characteristics of biomaterials science−multidisciplinary, multi-material, need-driven, substantial market and risk-benefit−color the field of biomaterials.
WHAT SUBJECTS ARE IMPORTANT TO BIOMATERIALS SCIENCE?
The understanding and measurement of biocompatibility is unique to biomaterials scienceUnfortunately, we do not have precise definitions or accurate measurements of biocompatibility. More often than not, biocompatibility is defined in terms of performance or success at a specific task. Thus, for a patient who is doing well with an implanted Dacron fabric vascular prosthesis, few would argue that this prosthesis is not "biocompatible." However, the prosthesis probably did not re-cellularize (though it was designed to do so) and also can throw off blood clots (emboli), though the emboli in this case usually have little clinical consequence. This operational definition of biocompatible (“the patient is alive so it must be biocompatible”) offers us little insight in designing new or improved vascular prostheses. It is probable that biocompatibility may one day be defined for applications in soft tissue, hard tissue, and the cardiovascular system (blood compatibility).
• Functional Tissue Structure and Pathobiology
Biomaterials incorporated into medical devices are implanted into tissues and organs. Therefore, the key principles governing the structure of normal and abnormal cells, tissues and organs, the techniques by which the structure and function of normal and abnormal tissue are studied, and the fundamental mechanisms of disease processes are critical considerations to workers in the field.
Special processes are invoked when a material or device heals in the body. Injury to tissue will stimulate the well-defined inflammatory reaction sequence that leads to healing. Where a foreign body (e.g., an implant) is present in the wound site (surgical incision), the reaction sequence is referred to as the "foreign body reaction.” The normal response of the body will be modulated because of the solid implant. Furthermore, this reaction will differ in intensity and duration depending upon the anatomical site involved. An understanding of how a foreign object alters the normal inflammatory reaction sequence is an important concern for the biomaterials scientist.
• Dependence on Specific Anatomical Sites of Implantation
Consideration of the anatomical site of an implant is essential. An intraocular lens may go into the lens capsule or the anterior chamber of the eye. A hip joint will be implanted in bone across an articulating joint space. A heart valve will be sutured into cardiac muscle and will contact both soft tissue and blood. A catheter may be placed in an artery, a vein or the urinary tract. Each of these sites challenges the biomedical device designer with special requirements for geometry, size, mechanical properties, and bioresponses.
• Mechanical and Performance Requirements
Biomaterials and devices have mechanical and performance requirements that originate from the physical (bulk) properties of the material. There are three categories of such requirements: mechanical performance, mechanical durability and physical properties. First, consider mechanical performance. A hip prosthesis must be strong and rigid. A tendon material must be strong and flexible. A heart valve leaflet must be flexible and tough. A dialysis membrane must be strong and flexible, but not elastomeric. An articular cartilage substitute must be soft and elastomeric. Then, we must address mechanical durability. A catheter may only have to perform for 3 days. A bone plate may fulfill its function in 6 months or longer. A leaflet in a heart valve must flex 60 times per minute without tearing for the lifetime of the patient (realistically, at least for 10 or more years). A hip joint must not fail under heavy loads for more than 10 years. The bulk physical properties will also address other aspects of performance. The dialysis membrane has a specified permeability, the articular cup of the hip joint must have high lubricity, and the intraocular lens has clarity and refraction requirements. To meet these requirements, design principles from physics, chemistry, mechanical engineering, chemical engineering, and materials science are invoked.
• Industrial Involvement
A significant basic research effort is now under way to understand how biomaterials function and how to optimize them. At the same time, companies are producing implants for use in humans and, appropriate to the mission of a company, earning profits on the sale of medical devices. Thus, although we are now only learning about the fundamentals of biointeraction, we manufacture and implant millions of devices in humans. How is this dichotomy explained? Basically, as a result of considerable experience we now have a set of materials that performs satisfactorily in the body. The medical practitioner can use them with reasonable confidence, and the performance in the patient is largely acceptable. Though the devices and materials are far from perfect, the complications associated with the devices are less than the complications of the original diseases.
The complex balance between the desire to alleviate suffering and death, the excitement of new scientific ideas, the corporate imperative to turn a profit, the risk/benefit relationship and the mandate of the regulatory agencies to protect the public forces us to consider the needs of many constituencies. Obviously, ethical concerns enter into the picture. Also, companies have large investments in the manufacture, quality control, clinical testing, regulatory clearance, and distribution of medical devices. How much of an advantage (for the company and the patient) will be realized in introducing an improved device? The improved device may indeed work better for the patient. However, the company will incur a large expense that will be perceived by the stockholders as reduced profits. Moreover, product liability issues are a major concern of manufacturers. The industrial side of the biomaterials field raises questions about the ethics of withholding improved devices from people who need them, the market share advantages of having a better product, and the gargantuan costs (possibly non-recoverable) of introducing a new product into the medical marketplace. If companies did not have the profit incentive, would there be any medical devices, let alone improved ones, available for clinical application?
When the industrial segment of the biomaterials field is examined, we see other essential contributions to our field. Industry deals well with technologies such as packaging, sterilization, storage, distribution and quality control and analysis. These subjects are specialized technologies, often ignored by academic researchers. Also, many companies support in-house basic research laboratories and contribute directly to the fundamental study of biomaterials.
A wide range of ethical considerations impact biomaterials science. Like most ethical questions, an absolute answer may be difficult to come by. Some articles have addressed ethical questions in biomaterials and debated the important points (Saha and Saha, 1987; Schiedermayer and Shapiro, 1989).
The consumer (the patient) demands safe medical devices. To prevent inadequately tested devices and materials from coming on the market, and to screen out individuals clearly unqualified to produce biomaterials, the
The evolution of the biomaterials field, from its roots with individual researchers and clinicians who intellectually associated their efforts with established disciplines such as medicine, chemistry, chemical engineering or mechanical engineering, to a modern field called “biomaterials,” parallels the formation of biomaterials societies. A few important biomaterials-related professional societies are: American Society for Artificial Internal Organs (ASAIO), founded in 1954; Society For Biomaterials USA, founded in 1975; The European Society for Biomaterials, founded in 1975; The Canadian Society For Biomaterials; the Japanese Society of Biomaterials; The Controlled Release Society, founded in 1978; The Biointerface Division of the AVS Science and Technology Society.
Biomaterials may be the most multidisciplinary of all fields. The impact to people and to commerce is huge. Because of this impact and multidisciplinarity, biomaterials is always an exciting area for study and application.
Lysaght, MJ, O'Laughlin J. The demographic scope and economic magnitude of contemporary organ replacement therapies. ASAIO 2000; J46: 515-21.
Rose, EA, Gelijns AC, PhD, Moskowitz AJ, MD, Heitjan DF, PhD, Stevenson LW, MD, Dembitsky W, MD, Long JW, MD, PhD, Ascheim DD, MD, Tierney AR, MPH, Levitan RG, MSc, Watson JT, PhD, Ronan NS, RN, Shapiro PA, MD, Lazar RM, PhD, Miller LW, MD, Gupta L, RD, MPH, Frazier OH, MD, Desvigne-Nickens P, MD, Oz MC, MD, Poirier VL, MBA, Meier P. Long-term use of a left ventricular assist device for end-stage heart failure.
Saha S, Saha P. Bioethics and applied biomaterials. J Biomed Mater Res: Appl Biomat 1987; 21: 181-190.
Schiedermayer, DL, Shapiro RS. The artificial heart as a bridge to transplant: Ethical and legal issues at the bedside. J. Heart Transplant 1989; 8: 471-473.
Society For Biomaterials Educational Directory (1992). Society For Biomaterials,
Williams, DF. Definitions in biomaterials. Proceedings of a consensus conference of the european society for biomaterials, Vol. 4.
Advanced Drug Delivery Reviews (Elsevier)
American Journal of Drug Delivery (Adis International)
American Society of Artificial Internal Organs Transactions
Annals of Biomedical Engineering (Blackwell - Official Publication of the Biomedical Engineering Society)
Annual reviews of Biomedical Engineering
Artificial Organs (Raven Press)
Artificial Organs Today (ed. T. Agishi; VSP Publishers)
Biomacromolecules (American Chemical Society)
Biofouling (Harwood Academic Publishers)
Biomedical Engineering OnLine (electronic - http://www.biomedical-engineering-online.com/start.asp)
Bio-medical Materials and Engineering (ed. T. Yokobori, Pergamon Press)
Biomaterial-Living System Interactions (BioMir; Sevastianov, ed)
Biomaterials (including Clinical Materials) (Elsevier)
Biomaterials, Artificial Cells and Artificial Organs - (Ed., T.M.S. Chang)
Biomaterials Forum (Society For Biomaterials)
Biomaterials: Processing, Testing and Manufacturing Technology (Butterworth)
Biomedical Materials (Elsevier)
Biomedical Microdevices (Kluwer)
Biosensors and Bioelectronics (Elsevier)
Cells and Materials (Scanning Microscopy International)
Cell Transplantation (Pergamon)
Colloids and Surfaces B: Biointerfaces (Elsevier)
Drug Delivery Systems & Sciences (Euromed Scientific)
Drug Targeting and Delivery (Academic Press)
Drug Delivery Technology
e-biomed: the Journal of Regenerative Medicine (http://rudolfo.ingentaselect.com/vl=25808836/cl=12/nw=
European Cells and Materials (electronic - http://www.eurocellmat.org.uk)
Frontiers of Medical and Biological Engineering (ed. Y. Sakurai; VSP Publishers)
IEEE Transactions on Biomedical Engineering
International Journal of Artificial Organs (Wichtig Editore)
Journal of Bioactive and Compatible Polymers (Technomics)
Journal of Biomaterials Applications (Technomics)
Journal of Biomaterials Science: Polymer Edition (VSP Publishers)
Journal of Biomedical Materials Research (Wiley- Official Publication of the Society for Biomaterials)
Journal of Biomedical Materials Research: Applied Biomaterials (Wiley)
Journal of Controlled Release (Elsevier)
Journal of Drug Targeting (Harwood Academic Publishers)
Journal of Engineering in Medicine (Institution of Mechanical Engineers)
Journal of Long Term Effects of Medical Implants (CRC Press)
Materials in Medicine (Chapman and Hall - Official Publication of the European Society for Biomaterials)
Medical Device and Diagnostics Industry (Canon Publications)
Medical Device Research Report (AAMI)
Medical Device Technology (Astor Publishing Corporation)
Medical Plastics and Biomaterials (Canon Communications, Inc.)
Nanobiology (Carfax Publishing Co.)
Tissue Engineering (Mary Ann Liebert, Inc.)
Trends in Biomaterials & Artificial Organs (Society For Biomaterials And Artificial Organs –
Acknowledgement: Parts of this overview of biomaterials have been taken from, or modified from, Biomaterials Science: An Introduction to Materials in Medicine, Elsevier Publishers,